SVAT Electronics CVDVR900 - Manual (Page 24)

Pow er AC 220V±20%, 50Hz±2%
Consumption 15W( excluding w ith hard disk)
Working Temperature 0~50
Working Humidity =80%
Outer Dimension 2U Standard device box 440( W) ×90( H) ×420( D) mm
Weight 5.5KG( Excluding hard disk)
Clock Build-in system clock and calendar
Others
TECHNICAL SPECIFICATION DATA
APPENDIX
I-1 IDE requirement:
1. There are 2 IDE ports in the main board: 1 is master and 1 is slave.
2. J4 IDE (the one close with power port) as master IDE port.
3. J10 IDE as slave IDE port.
4. Master hard disk must connect first before slave hard disk operate.
5. Also while 2 hard disks connect with IDE, they must be set with different jumpers
to make this functional.
I-2 Playback DVR Hard disk with PC:
The DVR file information requires the conversion program (STMTOAVI.EXE which comes
with the product) to make it as PC compatible and readable. It simply convert those
*.stm file into *.avi file, which can play with media player from PC.
Here are some steps for STMTOAVI software instruction:
1. Click the STMTOAVI program to start.
2. Open file with select those *.stm file.
3. Start the conversion.
4. Provided with the output file name and output path.
5. After conversion, there will be a new file with *.avi and must used with DIVX
playback software to run the avi file (DIVX version prefer with 5.03 or better).
NOTES