Operation instruction, Continued, A-3 timer record setting – SVAT Electronics CVDVR900 User Manual
Page 12
D1
Fixed
2400
2200
2000
1800
1600
1200
1000
800
HD1
Fixed
1200
1100
1000
900
800
600
500
400
CIF
Fixed
900
800
700
600
500
400
300
200
MAX
2400
2200
2000
1800
1600
1200
1000
800
MIN
2000
1800
1400
1200
1000
800
600
400
MAX
1200
1100
1000
900
800
600
500
400
MIN
900
800
700
600
500
400
300
200
MAX
900
800
700
600
500
400
300
200
MIN
600
600
500
400
300
200
200
100
Image Quality (Encode Rate Kbit/Second)
1
2
3
4
5
6
7
8
E
n
c
ode
M
e
thod
VBR
D1
HD1
CIF
CBR
Sharpness
OPERATION INSTRUCTION
continued
Conversion Table for Image Quality and Encoding Rate
HDD Store Mode: "Centralize, Individual, Compound" are 3 different hard disk storing modes
available in here. Using the cursor to select and press [Enter] to confirm this function:
• Centralize: All video signal and sound signals are stored into same one hard disk, and
then continuously with the next hard disk after the current one becomes full.
• Individual: Each channel of video signal and sound signals are stored into a different
hard disk, for example channel 1 recording into HDD1, and channel 2 recording into
HDD2.
• Compound: Channel 1 and 2 video and sound signal only record into HDD1 and
HDD2, taking into HDD1 first and then using HDD2 after the HDD1 is full. At the same
meaning that, Channel 3 and 4 video signal and sound signal only recording into
HDD3 and HDD4, taking into HDD3 first and then using HDD4 after HDD3 full.
Return: Using the cursor to select and press [Enter] to confirm back to main menu.
A-3
Timer Record Setting:
Highlight and select "Timer Record", then press [Enter]for this selection, the sub-menu will
shown (as below).
Timer Record: "On, Off" are the 2 different status settings. Use the cursor to select and press
[Enter] to confirm this function. While timer selected, there will be 16 different setting tasks
for timer setup in each channel (8 different day types, and 2 different period settings avail-
able for each type):
GENERAL SETTINGS
Record Settings
Timer Record
Motion Detection
Alarm Record
Channels
Housings
Network
Language
Exit
Timer Record Settings
Ch Timer Motion_Mode
1 On Off On Off
2 On Off On Off
3 On Off On Off
4 On Off On Off
Channel 1 Timer Record Settings
Date
Period 1
Period 2
Everyday 08:00-12:00 14:00-18:00
Mon
08:00-12:00 14:00-18:00
Tue
08:00-12:00 14:00-18:00
Wed
08:00-12:00 14:00-18:00
Thurs
08:00-12:00 14:00-18:00
Fri
08:00-12:00 14:00-18:00
Sat
08:00-12:00 14:00-18:00
Peak
08:00-12:00 14:00-18:00
Return