Preparing the remote – Sony CMT-EX5 User Manual
Page 7
Getting Started
7
GB
3
Connect the FM/AM antennas.
Set up the AM loop antenna, then connect
it.
AM antenna
AM loop
antenna
Black
White
FM antenna (Jack type A)
Extend the FM wire antenna horizontally
FM antenna (Jack type B)
Extend the FM wire antenna horizontally
FM antenna (Jack type C)
Extend the FM wire antenna horizontally
4
Reinstall the rear cover.
Pass the wires under the rear cover.
5
Connect the power cord to a wall outlet.
If the plug does not fit the wall outlet, attach
the supplied plug adapter (only for models
equipped with an adapter).
To turn on the system, press @/1.
Note on the front glass
The front glass is made of tempered glass. Under
normal conditions, this tempered glass is more
shock resistant and able to bear more weight than
ordinary glass. This glass, however, may shatter if
it receives a sharp blow or if it is scratched.
Note
Depending on the connected cords or antennas, you
may not be able to reinstall the rear cover.
Preparing the remote
Pull out the insulating sheet to allow
power to flow from the battery.
The remote already contains a battery.