Sony SAT-B2 - Manual (Page 79)

Appendix: Other Information 79
Back Panel (SAT-A2)
Connector Description Cable Type
SATELLITE IN Connects to the LNB on the satellite antenna. Solid Bare Copper
RG-6 Coaxial
(75-ohm/F-type)
LOW SPEED DATA Allows you to connect your DSS receiver to new technologies, as they are
introduced. Additional accessories may be required. Depends on future
applications
(D-sub 9 pin)
WIDE BAND DATA Allows you to connect your DSS receiver to new technologies (such as
high-definition television), as they are introduced. Additional accessories
may be required. Depends on future
applications
(D-sub 15 pin)
CONTROL-S IN/
S-LINK Allows you to pass on remote control signals to another Sony infrared-
controlled audio or video component. Audio mono or stereo
miniplug
VCR MOUSE/
CONTROL-S OUT Allows you to pass on remote control signals to another Sony infrared-
controlled audio or video component. Also used to connect the Sony VCR
Mouse. Audio mono or stereo
miniplug
DIGITAL OUT
(OPTICAL) Allows you to connect your DSS receiver to a digital audio component
with a digital input frequency of 48 kHz. Optical digital
mini-plug
RF REMOTE Connects to the RF antenna. RCA-type
AUDIO 3 OUT (R)/(L) Connects your DSS receiver to the right and left audio inputs of your
audio or video component. Audio (2)
(RCA-type)
AUDIO (R)/(L)
OUT Connects your DSS receiver to the right and left audio inputs of your
audio or video component. Audio (2)
(RCA-type)
VIDEO OUT Connects your DSS receiver to your TV or VCR’s video input. Video
(RCA-type)
S-VIDEO OUT Allows you to connect your DSS receiver directly to your TV (if your TV
has S-VIDEO IN). S-Video
(4-pin mini DIN)
CH3/CH4 Switch When you use an RF connection, this setting determines the TV channel
on which programs from the DSS receiver can be viewed.
VHF/UHF IN Allows you to connect your DSS receiver to your normal (terrestrial) TV
or cable TV service. RG-59 Coaxial
(75-ohm/F-type)
VHF(SAT)/UHF OUT Connects to your TV or VCR. RG-59 Coaxial
(75-ohm/F-type)
TEL LINE Connects your DSS receiver to a telephone jack. This allows you to order
pay-per-view programs. Telephone (RJ-11)
AC IN Connects your DSS receiver to a 120V AC outlet. AC
AC OUT Connects other components within a rating of AC 120V/300W/3A max. AC