Unlock mp modem configuration, Change the password (optional), Unlock mp modem – Sony MP595 User Manual
Page 52: Configuration

AirLink MP595 / MP595W Modem User Guide
46
2130795
Note: When the modem is using
a WAP connection, Watcher is
available over Ethernet only.
Note: USB and DUN are
disabled.
Unlock MP modem
configuration
Before configuring the wireless access point and related fea‐
tures such as security setting you need to unlock the MP
modem configuration.
This setting is password protected. To unlock the MP modem
configuration:
1.
In Watcher, select
Tools > Options > Wireless Access Point >
Password > Current
and enter the current password. (The
default password is
MP3G
.)
The MP modem configuration remains open for about five
minutes. If you encounter an error message while setting
up the wireless access point parameters, you may need to
reopen the configuration lock to continue setting the
parameters.
Change the password (optional)
You can change the factory default password, but you should
consider this carefully.
Note: If you change the password and forget the new password,
before changing any of the password-protected features you need to
reset the modem to all the factory defaults. See “Reset the MP
modem to factory defaults” on page 49.
To change the password:
1.
In Watcher, go to
Tools > Options > MP > Wireless Access
Point
.
2.
Under Password, select
Set new password
, and from the
drop‐down list, select
Yes
.
3.
In the
New password
field, type the desired password. (It
must be between 4 and 15 characters long.)
4.
Click
OK
.