Sony MP595 - Manual (Page 42)

AirLink MP595 / MP595W Modem User Guide
36 2130795
Launching 3G Watcher
To launch 3G Watcher:
1. Start 3G Watcher by choosing Start > Programs >
Sierra Wireless Inc > 3G Watcher > 3G Watcher , or
double click the desktop shortcut.
Connection to MP Physical Interface
1. Go to Tools > MP Physical Interface
Note: MP Physical Interface shows disabled under Tools after the
connection is established.
2. Select USB, Ethernet, or Serial .
Figure 4-3: Physical Port Selection
3. If you select Serial , select the COM 1 port.
4. Click OK
The interface availability for connecting will be subject to the
usual interface priority of the MP.
Changing the Physical Interface
To change the physical interface:
1. Click on the Disconnect button, if the watcher is connected
to your MP.
2. Go to Tools > MP Physical Interface