Speco Technologies HT-INTD3 - Manual (Page 19)

Operating your camera - DETAIL Operating your camera - RESET/RETURN
(7) DETAIL
①
Press the SET button to display the setup menu and move the arrow
indicator to ‘DETAIL’ using the UP and DOWN button.
② SET ‘DETAIL’ to the desired mode using the LEFT or RIGHT button.
(8) DEFAULT : Use to reset your camera to FACTORY DEFAULT
SETTING.
(9) PAGE 1 : Save the setting of NEXT PAGE function, and then
move to SET UP menu.
▶ OFF : Deactivation
▶ ON : DETAIL control mode (level 0~31)
When the level is up, the sharpness will increase.
Control this level to get your best picture quality.
If the level is too high, you can get an unnatural image
with video noise.
34 33