Other features, Falling asleep to music — sleep timer, Waking up to music — daily timer – Sony CMT-EP30 User Manual
Page 15: Falling asleep to music, Sleep timer, Waking up to music, Daily timer
Sound Adjustment/Other features
15
3
Press CLOCK/TIMER/SLEEP SET on
the remote repeatedly until “ON 0:00”
appears in the display.
4
Set the time to start playback using
TUNING/CLOCK/TIMER + or – on the
remote.
5
Press ENTER/PGM (TUNER MEM/
ENTER/PGM on the remote).
6
Press CLOCK/TIMER/SLEEP SET on
the remote repeatedly until “OFF 0:00”
appears in the display.
7
Set the time to stop playback using
TUNING/CLOCK/TIMER + or – on the
remote.
8
Press ENTER/PGM (TUNER MEM/
ENTER/PGM on the remote).
9
Press CD (CD/REMAIN on the remote)
or TUNER (TUNER/BAND on the
remote) depending on the sound
source you want to play.
10
Turn off the power and press TIMER
ON/OFF on the remote.
The TIMER indicator lights up.
To
Do this
Check the setting
Press CLOCK/TIMER/
SLEEP SET on the remote
repeatedly.
Change the setting
Start over from step 1.
To cancel the timer
Press TIMER ON/OFF on
operation
the remote.
Other features
Falling asleep to music
— Sleep Timer
You can set the system to turn off after certain
amount of time, so that you can fall asleep to
music.
1
Press CLOCK/TIMER/SLEEP SET on
the remote repeatedly until “SLEEP
OFF” appears in the display.
2
Press TUNING/CLOCK/TIMER + or – on
the remote to select the minutes until
the player goes off automatically.
Every time you press the button, the minute
display (the turn-off time) changes as
follows:
90
y 80 y 70 y … y 10 y OFF
3
Press ENTER/PGM (TUNER MEM/
ENTER/PGM on the remote).
To
Change the
time to turn off
Cancel the Sleep
Timer function
Waking up to music
— Daily Timer
You can wake up to music at a preset time
every day. Make sure you have set the clock
(see page 7).
1
Prepare the sound source you want to
play.
• CD: Load a CD.
• Radio: Tune in the preset station you
want (see page 10).
2
Adjust the volume.
Do this
Start over from step 1.
Start over from step 1 and select
“OFF” on step 2.