SUPER MICRO Computer SUPERSERVER 6014L-M - Manual (Page 45)

Chapter 5: Advanced Serverboard Setup
5-9
5-6 Adding PCI Cards
1. PCI slots
The 6014L-M system includes a CSE-RR1U-X riser card. This riser fi ts into a 66
MHz PCI slot to support a full-height, half-length PCI add-on card.
There is also the option of using the (optional) CSE-RR1U-EL riser card to support
the use of an expansion card in the x8 PCI-Express slot.
2. PCI card installation
Before installing a PCI add-on card, see step 1, above. Begin by swinging out the
release tab on the appropriate PCI slot shield. Insert the PCI card into the riser
card, pushing down with your thumbs evenly on both sides of the card. Finish by
pushing the release tab back to its original (locked) position.