SUPER MICRO Computer SUPERSERVER 6014L-M - Manual (Page 15)

Chapter 1: Introduction
1-5
1-3 Server Chassis Features
The following is a general outline of the main features of the SC512LF-260 chas-
sis.
System Power
When confi gured as a SuperServer 6014L-M, the SC512LF-260 chassis includes
a single 260W power supply.
Serial ATA Subsystem
For the 6014L-M, the SC512LF-260 chassis was designed to support one Serial
ATA hard drive.
Note: The operating system you use must have RAID support to enable the hot-
swap capability of the Serial ATA drives.
Control Panel
The SC512LF-260's control panel provides important system monitoring and control
information. LEDs indicate power on, network activity, hard disk drive activity and
system overheat conditions. The control panel also includes a main power button
and a reset button.
Rear I/O Panel
The SC512LF-260 is a mini 1U rackmount chassis. Its I/O panel provides one PCI
expansion slot, one COM port (another is internal), two USB ports, PS/2 mouse
and keyboard ports, a VGA port and two Gb Ethernet ports.
Cooling System
The SC512LF-260 chassis has an innovative cooling design that features an air
shroud and two 4-cm counter-rotating system cooling fans. Each of these fans plug
into a chassis fan header on the serverboard. The air shroud channels the airfl ow
generated by the fans to effi ciently cool the processor area of the system.
A fan speed control setting in BIOS allows fan speed to be determined by system
temperature [the recommended setting is 3-pin (Server)].