Id code – Savin G1619 User Manual
Page 154
Key Operator Settings
66
6
ID Code
Use this procedure to register the fol-
lowing kinds of ID Codes:
Important
❒ You can confirm ID Codes in the
Parameter Settings list. We recom-
mend you print a new list each
time you register or change ID
Codes.
❒ You can edit registered ID Codes
by performing the steps for regis-
tering ID Codes in the following
procedure. Display the ID Code
you want to change, and then
press the
{{{{Clear/Stop}}}} key and re-
enter the ID Code.
❖
❖
❖
❖ Polling ID
This ID is required for using De-
fault ID Polling Reception. See p.5
“Calling to Request a Message
(Polling Reception)”
Note
❒ You can enter A to F by the
Quick Dial keys.
❒ You can enter 0 to 9 by the num-
ber keys.
❒ 0000 and FFFF can not be en-
tered.
❖
❖
❖
❖ Memory Lock ID
This ID is required for printing a
message received using the Memo-
ry Lock function. See p.12 “Print-
ing a Memory-locked Message”.
Note
❒ You can enter 0 to 9 by the num-
ber keys.
❒ 0000 can not be entered.
Registering
To register ID Codes, perform the fol-
lowing procedure.
The following example is for Memory
Lock ID.
AAAA
Press the
{{{{User Tools}}}} key.
BBBB
Press
0
0
0
0 or 1
1
1
1 until " 4. Fax Fea-
tures " is displayed.
CCCC
Press the
{{{{OK}}}} key.
DDDD
Press
0
0
0
0 or 1
1
1
1 until " 4. Key Op.
Tools " is displayed.
EEEE
Press the
{{{{OK}}}} key.
FFFF
Press
0
0
0
0 or 1
1
1
1 until " 5. ID Code "
is displayed.
GGGG
Press the
{{{{OK}}}} key.
HHHH
Press
0
0
0
0 or 1
1
1
1 until " 2. Memory
Lock ID " is displayed.
IIII
Press the
{{{{OK}}}} key.