Samsung MM-B9 - Manual (Page 8)

GB
8
The auxiliary input can be used to take advantage of the
sound quality of your micro component system when listening
to other sources.
Examples: A television
A video disc player
A Hi-Fi stereo video cassette recorder
To connect the external source, the source must have an audio
output. In addition, you need an RCA connection cable.
Set the system to standby mode and disconnect it and the external
source from the main.
Connect the audio cable to the rear of the micro component system.
Connect the... To the connector marked...
Red jack R (right)
White jack L (left)
For optimum sound quality, do not invert the right and left
channels.
Plug the system back into the main socket and press On/Standby
( ) to switch it on.
Select the AUX source by pressing AUX.
Result:
AUX is displayed.
Switch the external source on.
Adjust the volume and balance as required:
Volume Equalizer S.Bass
Example: You can watch a film and take advantage of stereo sound
provided that the original sound track is in stereo (as if you
were in a cinema).
Connecting to an External Source
1
2
3
4
5
6
Speaker Connection
Directions in Installing Speaker
Installation in a place near heating apparatus, under direct lay of
light or with high humidity may cause performance degradation
of the speaker.
Do not install on the wall or on a high place of pole or other
unstable place to prevent any safety accident caused by falling
of the speaker.
Do not take the speaker apart from TV or computer monitor.
The speaker near the TV or computer monitor may influence the
quality of the screen display.
(Right Speaker) (Left Speaker)
+
– +
–
+
–
+
–
The System has Main Speaker jacks and Subwoofer Speaker
jacks.
Main Speaker Connection: Connect the Main Speaker cords
(red/black) to the Main Speaker jacks of
the System
Subwoofer Speaker Connection: Connect the Subwoofer Speaker
cords (blue/black) to the
Subwoofer Speaker jacks of the
System
On/Standby
AUX
Phones
Demo
P
Su
S
Mo
REC/Pause
CD Synchro
CD Repeat
TUNER /Band
Tuning Mode
C D
TAPE
FRONT LOADING MECHANISM