Samsung MM-B9 - Manual (Page 15)

15
GB
Always treat your cassettes with care; refer, if necessary, to
the section entitled “
Precautions When Using Audio Cassettes”
on page 21.
Switch the system on by pressing On/Standby ( ).
Open the cassette deck by pushing on the corner of the cover
marked Push Eject (
) until you hear a click and then releasing it.
Insert the pre-recorded cassette with the open edge of the tape
facing downwards.
Close the deck by pushing on it until it clicks into place.
To listen to... Press ...
Side A Tape ( ) button once.
Side B Tape ( ) button twice.
Result: The cassette starts playing.
Press the or button if necessary.
To... Press ...
Rewind the cassette button.
Fast-forward the cassette button.
When you have finished playback, press button.
Your micro component system has three cassette playback
modes which enable you to listen to both sides of a cassette
automatically.
Press REV.Mode until the appropriate symbol is displayed.
When the display indicates... The micro component system plays
back...
One side of the selected cassette and
then stops.
One side of the cassette.
The other side of the cassette and then
stops.
Both sides of the cassette indefinitely until
you press stop.
Selecting the Cassette
Playback Mode
Listening to a Cassette
1
2
3
4
5
6
Timer
On/Off
EQ/S.Bass
REV.
Mode CD SYNC.
CD
Repeat
Program/
Set
Tuning
Mode
VOL. Band
+10
Sleep
TAPE
Aux
Timer/
Clock
Random
Counter
Reset
REV.
Mode CD SYNC.
CD
Repeat +10
TAPE
Random
Counter
Reset
On/Standby
AUX
Phones
Demo Power
Surround
Volume
Sleep
Mono/ST Open/Close
Multi Jog
Sound
Mode
S.Bass
Level
REC/Pause
CD Synchro
CD Repeat
TUNER /Band
Tuning Mode
C D
TAPE
FRONT LOADING MECHANISM
MIC MIC Mixing
5
6
1 4
5
When playing a cassette, a counter is displayed to enable you to
take note of the counter value at the start of each track and thus
start playback at the beginning of the track to which you wish to
listen.
The counter is only displayed when a cassette is being played.
Before starting to record a cassette for which you wish to take note
of the counter values at the beginning of each track, reset the
counter by pressing Counter Reset.
Tape Counter