Sony NSR-1100 - Manual (Page 5)

NSR-1000 Series v1.1.1 Release Note
１
Overview
This release note provides the information for the software of the NSR-1200 / NSR-1100
/ NSR-1050H. For the built-in NSR Client (IMZ-NS Series) software, please refer to the
release note of the RealShot Manager Advanced included in the client software.
１-１ Additional features by v1.1.1
１-１-１ Multiple Codecs support
Newly supports multiple codecs for Sony IP network cameras and camera
servers shown below.
IP network camera (max. 3 codecs):
SNC-RS44, SNC-RS46, SNC-RS84, SNC-RS86
IP network camera (max. 2 codecs):
SNC-RH124, SNC-RH164
Camera server (max. 2 codecs):
SNT-EP104, SNT-EP154, SNT-EX101, SNT-EX101E, SNT-EX104,
SNT-EX154
１-１-２ Simple Motion Detection support
Newly supports receiving a simple motion detection alarm of the following
Sony camera servers as VMD (Camera).
Camera server:
SNT-EP104, SNT-EP154
１-１-３ H.264 Codec support
Newly supports H.264 Codec for the Sony cameras. Please use the following
firmware versions when you use H.264 Codec.
Supported model name and firmware version are as follows:
Camera Model Name Camera Firmware Version
SNC-RX530 v3.10/2.40 or higher
SNC-RX550 v3.10/2.40 or higher
- 1 -