Sony NSR-1100 - Manual (Page 37)

NSR-1000 Series v1.1.1 Release Note
５-１-１-４ 4CIF resolution support
Newly supports 4CIF resolution (PAL: 704x576, NTSC: 704x480) for the Sony IP
network cameras.
Supported model name and firmware version are as follows:
Camera Model Name Camera Firmware Version
SNC-RX530 3.10/2.40 or higher
SNC-RX550 3.10/2.40 or higher
SNC-RX570 3.10/2.40 or higher
SNC-CS50 2.30 or higher
SNC-RZ50 2.40 or higher
SNC-DF50 1.20 or higher
SNC-DF80 1.20 or higher
SNC-DF85 1.20 or higher (*1)
*1 When you want to select the image size of more than 4CIF on SNC-DF85,
the firmware version of the camera should be V1.02 or higher. If the former
version, do not select 4CIF in the image size setting.
５-１-１-５ Highlight function
Newly supports the highlight function that displays flashing red frames around
images in the custom layout at the occurrence of related alarm/event. For details,
refer to the User’s Guide.
５-１-１-６ Auto-logon function
Newly supports the auto-logon function that allows you to be logged on without being
certificated by the NSR-1000 series at start-up. For details, refer to the User’s Guide.
５-１-１-７ ONVIF support
Newly supports ONVIF Version 1.01.
・ Auto Registration and Multiple Camera Registration are not supported.
Please specify a Device Type "ONVIF".
・ Only supports JPEG streaming.
・ It is not guaranteed to connect to all ONVIF V1.01 conformant products.
- 33 -