Smart Technologies SMART UF75 - Manual (Page 7)

7 | KNOWLEDGE BASE – MAINTAINING YOUR SMART UF75 PROJECTOR
To remove the filter 1. Insert a flat head screwdriver under the center tab and gently pry up one end first
and then the other end.
2. Remove and replace element, reinstall filter on projector.
Focusing and adjusting the projected image
You can use any or all of these adjustments to refine the image. Adjust each setting a
little at a time.
To focus the projector
image
Move the focus adjustment lever up or down until the image is clear.
To adjust the projector
image
1. Unlock the projector by moving the lock lever to the left.