SRS Labs HANNSPREE NTSCTVTWEN1203 - Manual (Page 30)

29
Turning the TV On and Off
1
Press the POWER button on
the remote control (or control
panel). The power LED on the
front of the TV changes from
red to green, indicating that
the power has been turned
on.
2
Press the POWER button
again; in AV mode, the power
LED changes from green to
red, indicating that the TV is in (off) mode. When signal is not
detected in PC mode, the power LED turns amber, indicating that the
PC is in standby mode.
Selecting Channels
Press the CH UP button or CH
DOWN button on the control
panel to select the channel or
enter the specific channel num-
ber by pressing the number but-
tons on the remote control.
Power button
Power LED
ON/OFF MUTE SOURCE MENU < CH > < VOL >
Channel down
Channel up