Siemens 463V FA - Manual (Page 21)

Colour monitor 463V FA
A26361-K864-Z100-1-5E19 English - 19
Accessories: Power adapter with power adapter cable
Power cable (1.8 m)
D-SUB data cable (1.8 m)
DVI-D data cable (1.8 m)
Storable display modes: 26
Electrical data
Video: analogue, positive, 0.7 V
pp
, 75 Ω
digital: DVI-D
Synchronisation: Separate Sync. TTL, positive or negative
Composite Sync. TTL, positive or negative
Sync. On Green
Horizontal frequency: 30 kHz .... 82 kHz (multi-scanning)
Refresh rate: 56 Hz .... 76 Hz
Maximum pixel rate: 135 MHz
Power supply: switches automatically
100 V - 120 V, 50 Hz - 60 Hz
±
2 Hz, 0.6 A
220 V - 240 V, 50 Hz - 60 Hz
±
2 Hz, 0.3 A
Total power consumption: < 60 W (ON, Normal mode)
< 3 W in the energy-saving mode (standby mode, suspend
mode and OFF mode)
Environmental conditions
Environment class 3K2, IEC 721
Rated range of operation:
Humidity: 15 °C .... 35 °C
20 % .... 85 %
Limit range of operation:
Humidity: 5 °C .... 35 °C
20 % .... 85 %
Condensation must be avoided.
VESA-DDC-compatible VGA interface
Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video
Electronics Standard Association, Display Data Channel) is used as the communications interface
between the monitor and the computer. If your computer is equipped with a VESA-DDC-compatible
VGA interface, it can automatically read the data for ensuring optimum operation from your monitor
and select the appropriate settings.
i
If the monitor 463V FA is not yet displayed in the list of monitors, you can select the
following monitor instead:
Fujitsu Siemens 462V FA, 461V FA, Fujitsu Siemens 4612 FA