Siemens 463V FA - Manual (Page 16)

Colour monitor 463V FA
14 - English A26361-K864-Z100-1-5E19
Performing auto-adjustment
Performing auto-adjustment ( Auto Image Adjust )
The Auto Processing message is displayed.
Adjusting the brightness and contrast
Calling the Contrast / Brightness / Backlight setting window.
Setting the contrast of the display ( Contrast )
This function allows you to modify the contrast of bright colour tones.
Setting the brightness of the display ( Brightness )
This function allows you to modify the contrast of dark colour tones.
Setting the brightness of the background lighting ( Backlight )
This function allows you to change the brightness of the entire display.
i
If the contrast is set too high, bright surfaces can no longer be distinguished from very
bright surfaces. If the contrast is set too low, the maximum brightness will not be
achieved.
Adjusting size and position
Calling the Manual Image Adjust setting window
Adjusting picture position ( H./V.Position )
The INPUT button allows you to switch between the H.Position and the
V.Position .
Adjusting the horizontal size ( H.Size )
There is an optimum setting for every resolution.
Eliminating picture interference ( Fine Tune )
This function enables the fine tuning of your monitor in case of picture
interferences.
Adjusting the Zoom
This function allows you to enlarge a section of the display.