Sony GRAND WEGA KDF-55XS955 - Manual (Page 22)

Setting Up the LCD Projection TV
22
KDF-55/60XS955
2-059-372-11(1)
LCD Projection TV Front Panel and Connectors
Front Panel
Item Description
1 Memory Stick
indicator
When the Memory Stick indicator is lit, indicates that the
Memory Stick is being read. (Do not remove the Memory
Stick when the indicator is lit.)
2 Memory Stick slot For inserting Memory Stick media to view on your LCD
projection TV. For details, See “Inserting and Removing a
Memory Stick” on page 78.
3 LAMP LED Lights up in red when the lamp for the light source has
burned out. For details, see “Replacing the Lamp” on
page 16.
4 TIMER LED When lit, indicates one of the timers is set. When the
timer is set, this LED will remain lit even if the TV set is
turned off. For details, see page 122.
5 POWER/
STANDBY LED
Lights up in green when the TV set is turned on. When in
standby mode, the LED lights up in red. The LED does
not light up when the main power is turned off. If the LED
blinks continuously, this may indicate the display unit
needs servicing (see “Contacting Sony” on page 115).
6 POWER Press to turn on/off the LCD projection TV. The POWER
button has a built-in Infrared (IR) Receiver that receives
IR signals from the remote control.
7 CHANNEL +/– Press to scan through channels.
8 VOLUME +/– Press to adjust the volume.
9 TV/VIDEO Press to select between the TV’s tuner and other video
equipment inputs.
POWER/STANDBY POWER LAMP TIMER STD/DUO
3
3
#
TV/VIDEO
VOLUME
CHANNEL
POWER/STANDBY
POWER
LAMP TIMER
STD/DUO
2 1 6 4 3 5
7
8
9