Sanyo VPC-S1070 - Manual (Page 66)

52 Troubleshooting
English
Troubleshooting
Problem Action
Camera does not turn on • The battery may be exhausted. Charge or replace
the battery.
• The battery is installed incorrectly. Re-insert the
battery observing the correct polarity.
Camera turns off
automatically Press the Power button again to turn on the camera.
LCD turns off automatically Press any button to turn on the LCD, when AUTO
LCD ON mode (30 SEC or 1 MIN) is achieved.
Empty battery icon is
displayed on the LCD then
camera turns off Battery is exhausted. Charge or replace the battery.
LCD screen displays ‘Card
Requires Formatting’ Memory card format not recognized. Re-format the
memory card.
LCD screen displays ‘Card
is Full’ Memory card is full. Replace the memory card with a
new one or delete unnecessary images from the
existing card.
LCD screen displays ‘Card
is locked’ The card is protected by a protect switch
mechanism. Move the switch to the unlock position.
Insufficient memory space
to complete request Insufficient space in memory to rotate an image.
Delete unnecessary images.
No image displays on the
TV screen Incorrect TV-out type was selected. Set correct
TV-out type to match your TV system.
Insufficient space on the
card Delete unnecessary images.