Sanyo VPC-S1070 - Manual (Page 49)

Photo & Video Playback 35
Using the Playback Menu
English
Slideshow
The Slideshow function allows you to view all
stored photos in a continuous sequence.
To view a slideshow:
1. Press the MENU button to select Slideshow
from the menu, then press the OK button to
enter the Slideshow function.
2. Press the Up/Down navigation buttons and
the OK button to select from the available
options:
• Start: Select to start the slideshow.
• Interval: Select to set the interval time between each photo during the
slideshow. Use the Left/Right navigation buttons to set a value in
seconds. The default setting is 5 seconds.
• Loop: Select to enable/disable a continuous loop of the slideshow. Select ON
or OFF (default) from the submenu.
• Exit: Select to exit to the main menu.
Resize
The Resize function allows you to change the
image resolution.
To resize a photo:
1. Press the MENU button to select Resize from
the menu, then press the OK button to enter
the Resize function.
2. Press the Up/Down navigation buttons and
the OK button to select the resize ratio you
require: 8M, 6M, 5M, 3M, 1M and VGA.
3. Select Exit to return to the main menu.
Note: It is only possible to scale-down image resolutions. If the current image resolution is
VGA, this menu item is disabled in the Resize submenu. The ratio of the image (3:2 or 16:9)
remains unchanged after resizing.
• This function only supports native pictures
• Cropped images cannot be resized
• If there is not sufficient storage space, images cannot be resized
• If the SD/MMC card is locked, images cannot be resized
• VGA images cannot be resized
START
INTERVAL
LOOP
EXIT
SLIDESHOW
1/140 1/140 1/140
5 sec
OFF
10M 10M
8 M
6 M
5 M
3 M
RESIZE
10M 10M
1/140 1/140 1/140