Sanyo VPC-S1070 - Manual (Page 53)

Camera Settings 39
The Setup Menu
English
Camera Settings
The Setup Menu
The setup menu, available in capture and playback modes, allows you to configure
the camera’s general settings according to your preferences.
To access the setup menu:
1. Press the MENU button when in Playback or
any of the capture modes.
2. Select Setup from the menu. Press the OK
button to enter, then the submenu appears.
3. Use the Left/Right navigation buttons to scroll
through the options and press the OK button to
enter further submenus and to confirm your
selection. Refer to the following sections for
more detailed information about each setting.
LCD Brightness
The LCD Brightness setting allows you to
brighten or darken the LCD backlight. Press the
OK button to enter. Use the Left/ Right
navigation buttons to increase or decrease the
brightness.
File Number
The File No. setting allows you to reset all file
numbers assigned to each of the files on your
camera. Press the OK button to confirm. Select
RESET to reset or CONTINUE to set the file
numbers in continuous order.
SETUP
Press OK to enter
OK Enter
LCD BRIGHTNESS
FILE NO.
RESET
CONTINUE