Sony CMT-HPZ9 - Manual (Page 26)

26 GB
The clock display can be turned off to minimize
the amount of power consumed during standby
(Power Saving Mode).
Press DISPLAY repeatedly while the
system is off until the clock display
disappears.
To cancel Power Saving Mode
Press DISPLAY while the system is off. Each
time you press the button, the display switches
cyclically as follows:
Clock display*
t No display (Power Saving
Mode)
* The clock is displayed only if you set the clock.
Note
You cannot perform the following operations in Power
Saving Mode.
– setting the clock
– changing the AM tuning interval (except for
European model)
– changing the CD power manage function
Tips
• STANDBY indicator lights up even in Power Saving
Mode.
• The timer continues to operate in Power Saving
Mode.
You can check the playing time and remaining
time of the current track or that of the disc.
When an ATRAC CD or MP3 CD is loaded, you
can also check the information recorded on disc,
such as the titles.
Checking the remaining time
and titles
Press DISPLAY during Normal Play.
Each time you press the button, the display
changes cyclically as follows:
Current track number and elapsed playing time
t Current track number and remaining time or
“– –.– –”
1) t Remaining time of the disc or
“– –.– –” 2) t Track title (ATRAC CD and MP3
CD 4) only) t Group name 3)4) t Clock display
(for eight seconds) t Bass level (for eight
seconds) t Treble level (for eight seconds)
1) For MP3 CDs
2)
“– –.– –” appears for ATRAC CDs, MP3 CDs or
when the audio CD is in a play mode other than 1
DISC Play.
3) For ATRAC CDs and MP3 CDs
4)
When you play back a track with an ID3 tag ver. 1
or ver. 2, the ID3 tag information appears. The ID3
tag displays the track title, album name and artist
name information.
Note
When fast forward or fast reverse is performed, elapsed
playing time and remaining time of the track may not
be displayed accurately.
Display
Turning off the display
— Power Saving Mode
Viewing information
about the disc in the
display