Adjusting the handstrap, Adjusting the handstrap -10 – Symbol Technologies MC70 User Manual
Page 28
1 - 10 MC70 User Guide
7.
Press the red Power button.
8.
Tap Start - Phone - Menu - Options - Network tab and verify that the service provider appears in the
Current network: field.
9.
Make a call to verify connection.
Adjusting the Handstrap
The EDA handstrap is attached to the bottom of the battery cover. Adjust the handstrap to increase comfort
when holding the EDA for extended periods of time. To adjust the handstrap:
1.
Feed the handstrap through the handstrap slot in either direction, to tighten or loosen.
2.
Secure the handstrap by pressing the two sides together as shown in
Figure 1-10
Handstrap Adjustment
NOTE
For detailed information about WWAN activation and settings, refer to the MC70 Integrator
Guide.