Symbol Technologies MC70 - Manual (Page 116)

5 - 6 MC70 User Guide
• Simultaneously charges up to four EDAs.
Charging
Insert the EDA into a slot to begin charging.
Figure 5-5 EDA Battery Charging
Battery Charging Indicators
The EDA’s charge LED shows the status of the battery charging in the EDA. See Table 1-2 on page 1-7 for
charging status indications.
The standard battery fully charges in approximately four hours and the extended capacity battery fully charges
in approximately eight hours.
Charging Temperature
Charge batteries in temperatures from 0
o
C to 40
o
C (32°F to 104°F). Note that at temperatures above 35
o
C,
charging is intelligently controlled by the EDA and the charging accessory in order to ensure safe operation
and optimize long-term battery life.
To accomplish this, for small periods of time, the EDA or accessory alternately enables and disables battery
charging to keep the battery at acceptable temperatures. The EDA or accessory indicates when charging is
disabled due to abnormal temperatures via its LED. See
Table 1-2 on page 1-7 .
NOTE
Use only a Symbol-approved power supply output rated 12 Vdc and minimum 9A. The
power supply is certified to EN60950 with SELV outputs. Use of an alternative power supply will
invalidate any approval given to this device and may be dangerous.
H INWEIS
Benutzen Sie nur eine von Symbol Technologies genehmigte Stromversorgung mit einer
Ausgangsleistung von 12 V (Gleichstrom) und mindestens 9A. Die Stromversorgung ist nach
EN60950 für die Verwendung in SELV-Stromkreisen zertifiziert. Bei Verwendung eines anderen
Netzteils werden alle für das Gerät gewährten Genehmigungen außer Kraft gesetzt, und der
Betrieb kann gefährlich sein.