Sony PCNA-MR10 - Manual (Page 49)

Evaluating your Home Network Environment
49
6 Select “Use the following IP address” and specify an IP address and subnet
mask, using the following format:
IP address: 169.254.XXX.XXX
(Replace XXX with a numeric value between 001 and 254 — as an example:
169.254.222.222)
Subnet mask: 255.255.0.0 (Use this number for the subnet mask)
7 Click OK.
The IP address is fixed, as specified. Close the Local Area Connection
Properties and the Internet Protocol (TCP/IP) Properties dialog boxes.
Additional Information
❑ When you set up RoomLink™, the IP address must be specified. See
“Specifying an IP address” on page 65, for details.
❑ Use different numbers, when specifying the IP address for RoomLink, where
the IP address numbers are represented as “XXX.XXX.”