Sony CMT-DV2D - Manual (Page 11)

Ge
tting Star
te
d
11 GB
Use buttons on the remote for the operation.
1
Press ?/1 to turn on the system.
2
Press CLOCK/TIMER SET.
3
Press . or > repeatedly to set the
hour.
4
Press ENTER.
5
Press . or > repeatedly to set the
minute.
6
Press ENTER.
The clock starts working.
To adjust the clock
1
Press CLOCK/TIMER SET.
2
Press . or > to select “CLOCK SET”,
then press ENTER.
3
Do the same procedures as step 3 to 6
above.
Notes
• The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.
• You cannot set the clock in Power Saving Mode
(page 34).
You can change the on-screen display language.
1
Turn on your TV and select the video
input.
2
Press ?/1 to turn on the system.
3
Press DVD N (or DVD NX on the
unit) to switch the function to DVD.
4
Press x to stop playback.
5
Press DVD SETUP in stop mode.
6
Press < or , repeatedly to select
“Language”, then press ENTER.
7
Press M or m repeatedly to select
“OSD”, then press ENTER.
8
Press M or m repeatedly to select a
language from the displayed list, then
press ENTER.
9
Press DVD SETUP to turn off the Setup
Display.
Note
Pressing DVD SETUP in step 5 does not work when
using a JPEG disc. Eject the disc before making the
setting.
Setting the clock Selecting a language