Assembly, continued, Parts – Shindaiwa 80045 User Manual
Page 5
5. Remove the caution label, push the
thumb release toward the center
and push the control knob and
spring down until the knob latches.
See Figure 5.
Caution!
Once the knob is latched, do not
move the thumb release until you
have completed step 8!
6. Slide the wire retaining clip onto the
wire. Insert the control wire
through the hole in the shutoff
plate, then slide the clip over the
shutoff plate until the clip locks into
place. See Figure 6.
3
Assembly, continued
Figure 5
Figure 6
Control Knob &
Wire Assembly
Spring
Remove Caution
Label
Thumb
Release
Figure 7
OF
F
ON
Wire Clip
Shutoff Plate
Wire
Handle
Grips
Screen
Clips
Screen
7. Install handle grips onto the
handle. It is not necessary to use
lubricants to do so. Insert screen
into hopper by sliding it under the
screen clips. See Figure 7.
The 75RS spreader should now
be completely assembled and
ready for use.
OFF
ON
Parts
Replacement parts may be obtained
from your local Shindaiwa dealer.
When ordering, be sure to include the
spreader model number, part number
and description as shown here.
Hopper Assy.
15269-1
14 Agitator
14510
1
Hopper*
15270
15
Impeller Shaft Bearing*
14312-1
2 Shutoff Plate*
14454-1
16
Hopper Screen
14603
3
Shutoff Plate Guide (2)*
15272
17
Screen Clip (2)
14022
4
Rate Cam & Chute Assy.*
14455-1
18
Handle Brace w/Plug-L.H.
15258-1
5
Impeller Assy.
15263
19
Handle Brace w/Plug-R.H.
15261-1
6
Frame Assy.
15262-1
20
Handle Tube
15283-1
7
Drive Wheel w/tire
14939-1
21
Handle Grip (2)
15264
8
Axle Gear
13360
22
T-Handle Assy.
13634-2
9
Gear Cover Assy.
14629
23
Control Knob Spring
14462
10 Axle Collar
13362
24
Control Knob & Wire Assy.
13640-2
11
Axle
15276
25
Wire Retaining Clip
13643-1
12
Axle Bushing (2)
14951
26
Hopper Label*
15275
13
Free Wheel w/tire
14940-1
27
Hopper Plug
15271
Key Description
Part
Key Description
Part
No.
No.
No.
No.
Optional Accessory
Hopper Cover 14606
The clear plastic Hopper Cover fits
over the top, preventing moisture
from contaminating the chemicals.
10
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
*Items included in the Hopper assy.
75RS
75RS
TM