Smeg CW400RSD - Manual (Page 18)

17
Regeneration cycle (for models equipped with
water softeners)
For models equipped with drain pumps, perform a drain
cycle before executing the regeneration cycle.
For models not equipped with drain pumps, remove the
overflow and close the door.
Press the
button to select the option. The led
indicator turns on and the led indicator flashes.
Hold down the button for two seconds to initiate the
regeneration cycle. During the regeneration cycle the
and led indicators flash.
If the door is opened at any time the regeneration cycle
stops along with any filling operations. When the door is
closed again the cycle starts from where it left off.
After 20 minutes the regeneration cycle finishes and the
machine remains in standby with the
and led
indicators steadily on.
Open the door, insert the overflow into the basin and
turn off the main wall switch.
During the execution of the regeneration cycle it will not be possible to perform any operations.
Refilling the supply of regenerating salt (for models equipped with water softeners)
Perform the salt refill when there is no water in the basin in order to keep wash water from entering the water
softener device.
Caution: Use only specific salt. Do not use table salt.
The salt tank has a capacity of about 1 kg of granulated salt.
The tank is situated at the bottom of the basin. After having extracted the basket, unscrew the cap and pour the
salt through the provided funnel. Before screwing the cap back in place remove any eventual salt residues in
proximity to the opening.
Once having finished using the machine, and after
having performed the final draining and eventual
regeneration, shut off the machine by pressing the
button and turn off the wall switch.
10 MAINTENANCE AND CLEANING
Notwithstanding that special, programmed maintenance is not required, we recommend having the dishwasher
checked by a specialized technician twice a year.
Note:
intentional damage or that derived from carelessness, negligence, lack of respect for the regulations,
instructions and norms or erred connections are not to be considered the responsibility of the manufacturer.
10.1 Daily cleaning
The dishwasher has an IPX4 protection rating, but the use of direct streams of water for its cleaning is forbidden.
Cleaning of the filter during the day