Sony CRX1600L - Manual (Page 17)

11
Continued
AC Power Inlet
The 1600L i.LINK drive uses a 100 to 240V, 50-60 Hz, 1.2 amp
maximum power supply. This will allow the unit to be attached to
either 110 volt or 220 volt circuits.
IEEE 1394 Cable and Connectors
IEEE 1394 is commonly called either i.LINK or FireWire. Each uses a
different symbol, though FireWire and i.LINK are compatible.
i.LINK FireWire
The cable ends are identical, so there is no worry about putting the
right connector into an i.LINK port.
6-pin i.LINK connector