Sanyo VPC-MZ3 - Manual (Page 176)

SETTING THE OPERATIONAL SOUNDS
2
Select “BEEP”, and press the SET
button.
œ
The Operational Sounds Screen
appears.
TURN ON/OFF:
Select the sound that is produced
when the power is turned on or off.
SHUTTER:
Select the sound that is produced
when the shutter release button
is pressed.
KEY SW:
Select the operation sound that is
produced when the SET button,
MENU button, etc. is pressed.
3
Press [
j
] or [
l
] on the arrow button
to select the desired option, and
then press [
c ].
œ
The Select Operational Sound
Screen appears.
4
Press [ j ] or [ l ] on the arrow button
to select the desired operational
sound.
œ
Select from 8 different sounds (A to
H).
œ You can hear the selected
operational sound by pressing the
shutter release button.
œ
If OFF is selected, no sound is
produced.
5
Press the SET button.
œ The operational sound is set, and
you are returned to the Set
Operational Sounds Screen.
Operational Sounds Screen>
p
C
p OFF
p OFF
BEEP
TURN ON/OFF
SHUTTER
KEY SW
EXIT
j
p
l@
BEEP
TURN ON/OFF OFF
SHUTTER FOR SOUND
SX612/EX, GX, U (VPC-MZ3 GB2) Thu. Sept., 05/2002
173
English