Sennheiser SKM 5200 - Manual (Page 28)

30
Specifications
Modulation wideband FM
Frequency range 450–960 MHz
Switching bandwidth 36 MHz
Transmission frequencies channel bank “FIX” with customer-
specific frequencies
channel bank “VAR”
with 20 freely selectable frequencies
(frequencies tunable in steps of 5 kHz)
RF output power 50 mW (–3 dB) at 50
Ω
Frequency stability ± 10 kHz within the specified
temperature range
Spurious emission < 4 nW
Nominal/peak deviation
± 40 kHz/± 56 kHz FM
Signal-to-noise ratio typ. 114 dB (A)
rms
(ATTEN –40 dB)
THD
< 0.5 %
(at 1 kHz, nom. deviation)
AF frequency response 60–20,000 Hz
Noise reductions system Sennheiser HiDyn plus™
Low-cut frequency adjustable (flat, 120 Hz, 190 Hz)
(–3 dB)
Sensitivity adjustable in steps of 1 dB from
–40 to 0 dB
Power supply via B 5000 (two AA size cells)
or BA 5000 (battery pack)
Operating time typ. 8 h with B 5000-1
typ. 8 h with BA 5000-1
Temperature range –10 to +55 °C
Dimensions length: 200 mm, ∅ 35.5 mm
Weight approx. 300 g
Type approval USA: FCC-Part 74.861
FCC ID: DMOSKM52
Canada: RSS-123
IC: 2099A-SKM5200
EU: ETSI EN 300 442-1/-2
CE 0682!
SKM 5200_512717_0506_Sp6.book Seite 30 Donnerstag, 7. Dezember 2006 3:28 15