Sennheiser SKM 5200 - Manual (Page 22)

24
There are two options for setting the frequencies:
y
You can set a new frequency for the selected channel:
y
You can change to a different channel and set a new frequency
for the new channel:
̈
In the selection mode of the “ TUNE ”
menu, press the multi-function
switch
¶
(switch position ț SET ). The
current channel number appears on
the display and then the currently
assigned frequency is displayed.
̈
Change the frequency by sliding the
multi-function switch
¶
to the
position ̆ (UP) or ̄ (DOWN).
̈ Store your setting.
̈ Press the multi-function switch for a
longer time
¶
(switch position
ț SET ). The current channel flashes on
the display.
̈
Select a new channel by sliding the
multi-function switch
¶
to the
position
̆
(UP) or
̄
(DOWN).
̈
Confirm your selection by pressing the
multi-function switch (switch position
ț SET ).
̈ The current frequency of the selected
channel is displayed.
Change the frequency by sliding the
multi-function switch
¶
to the
position ̆ (UP) or ̄ (DOWN).
̈
Store your setting.
SET
DOWN
UP
¶
CH
MHz
CH MHz
CH
SET
DOWN
UP
¶
CH
RF
CH
MHz
RF
MHz
SKM 5200_512717_0506_Sp6.book Seite 24 Donnerstag, 7. Dezember 2006 3:28 15