Sennheiser SKM 5200 - Manual (Page 12)

14
Doing a frequency check
The radio microphone has a frequency check mode that prevents
that the radio microphone transmits on an unwanted frequency
after switch-on.
If you want to select another frequency, proceed as follows:
̈ Release the red button
º
.
̈ Within five seconds, press the multi-functions switch
¶
twice
(switch position ț SET ).
You will be passed to the “ CHAN ” or “ TUNE ” menu and can
change the transmission frequency as required. (See “Adjust-
ment tips for the operating menu” on page 23.)
Identifying the radio microphone
The radio microphone comes with nine interchangeable color-
coded identification markers, allowing you to clearly identify each
radio microphone.
̈ When switching on the device, keep
the red button
º
depressed.
The current frequency is displayed
on the display panel without the ra-
dio microphone transmitting.
̈
If the displayed frequency is the
wanted frequency, you can release
the red button
º
.
After five seconds the “RF“
ቤ
icon
appears and the radio microphone
starts transmitting.
̈
To remove the identification
marker, press the two snap-in pins
together while sliding the
identification marker out of the
guide rails.
̈ Put on the new identification
marker by sliding it onto the guide
rails.
MHz
RF
ቤ
¶
º
SKM 5200_512717_0506_Sp6.book Seite 14 Donnerstag, 7. Dezember 2006 3:28 15