Backlight compensation, Spot exposure control, Pg. 31) – JVC GR-D246 User Manual
Page 31: Pg. 31, spot exposure, Control), 31 spot exposure control, Light, Backlight compensation spot exposure control
EN
31
FEATURES FOR RECORDING
MasterPage: Start_Right
Backlight compensation brightens the subject
quickly.
With simple operation, backlight compensation
feature brightens the dark subject portion by
increasing the exposure.
1
Set the Power Switch to “M”.
2
Press BACK LIGHT so that the Backlight
Compensation indicator “
” appears.
To cancel Backlight Compensation
Press BACK LIGHT twice so that the “
”
indicator disappears.
NOTE:
Using Backlight Compensation may cause the light
around the subject to become too bright and the
subject to become white.
Selection of a spot metering area enables more
precise exposure compensation. You can select
one of the three metering areas on the LCD
monitor/viewfinder.
1
Set the Power Switch to “M”.
2
Press BACK LIGHT twice so that the Spot
Exposure Control indicator “
” appears.
● A spot metering area frame appears at the
centre of the LCD monitor/viewfinder.
3
Press + or – to select the desired spot
metering area frame.
4
Press MENU.
● Spot Exposure Control is engaged.
● Exposure is adjusted to make the brightness of
the selected area most appropriate.
To lock the iris
3, press and hold MENU over 2
seconds. The “
” indication appears and the
iris is locked.
To cancel Spot Exposure Control
Press BACK LIGHT once so that the “
”
indicator disappears.
NOTES:
● You cannot use the Spot Exposure Control at the
same time with following functions.
• “SQUEEZE” in “WIDE MODE” (
• “STROBE” in “PROGRAM AE” (
• Manual Exposure Control
● Depending on the shooting location and condition,
optimum result may not be attained.
Backlight Compensation
Spot Exposure Control
GR-D246PAL.book Page 31 Tuesday, March 29, 2005 3:43 PM