Sony MHC-RV800D - Manual (Page 35)

DVD/VIDEO CD/CD/MP3
35 GB
3
Press v or V (or M or m on the remote)
repeatedly to select the audio signal
you want.
x When playing a DVD
Depending on the DVD, the choice of the
language varies. When 4 digits are
displayed, they represent the language code
(see “Language code list” on page 77).
When the same language is displayed two
or more times, the DVD is recorded in
multiple audio formats.
x When playing a VIDEO CD or CD
• STEREO: The standard stereo sound.
• 1/L: The sound of the left channel
(monaural).
• 2/R: The sound of the right channel
(monaural).
4
Press ENTER.
To turn off the Control Menu
Press DVD DISPLAY repeatedly until the
Control Menu disappears.
Tip
You can select “AUDIO” directly by pressing
AUDIO on the remote. Each time you press the
button, the item changes.
Notes
• For discs not in multiple audio format, you cannot
change the sound.
• During DVD playback, the sound may change
automatically.
Displaying the audio
information of the disc
(DVD only)
When you select “AUDIO”, the channels being
played are displayed on the screen.
For example, in Dolby Digital format, multiple
signals ranging from monaural to 5.1 channel
signals can be recorded on a DVD. Depending
on the DVD, the number of the recorded
channels may differ.
Current audio format *
DOLBY DIGITAL 3/2.1
PROGRAM FORMAT
DVD
1: DVD
1 2 ( 2 7 ) MAKING SCENE
1 8 ( 3 4 )
T 1 : 3 2 : 5 5
1: ENGLISH
* “PCM”, “MPEG”, “DTS”, or “DOLBY DIGITAL”
is displayed.
For “DOLBY DIGITAL”, the channels in the
playing track are displayed numerically as follows:
For Dolby Digital 5.1 ch:
Rear component 2
DOLBY DIGITAL 3 / 2 . 1
Front component 2 +
Center component 1 LFE (Low Frequency
Effect) component 1
continued