Sony PCLK-MN10A - Manual (Page 70)

70
4
Adjust the starting point (point A).
Each click of or in the “A-B Erase” dialog box moves point A
by 1-frame interval* (1 frame = 1/86 second) during stereo
recording. You can also slide
to the left or right to adjust point
A.
* In Monaural and LP2 stereo mode : 2-frame intervals
In LP4 stereo mode : 4-frame intervals
5
When adjustment of point A is completed, click .
The track starts playing from point A. Clicking or moves
the track position backwards or forwards, allowing you locate the
ending point (point B) of the erasure easily.
6
Click when the part of the track that you want to erase
finishes playing.
The ending point (point B) is set temporarily.
Rehearsal playback is performed for about 4 seconds of a segment
that begins about 2 seconds before point A and ends about 2
seconds after point B.
7
Adjust the ending point (point B).
Adjust the location of point B using and or
as you did with
point A.
8
When adjustment of point B is completed, click .
The part from point A to point B is erased.