Sagem myC-3b - Manual (Page 19)

16
My phone in 5 minutes
In due course, when the battery is completely discharged, or if it has
been removed, you will be prompted systematically to confirm date and
time.
Setting the date:
Set the date by entering it directly in numerical form or by using the
keys to increase or decrease the default values.
Use the key (or key) to access the next (or last) data input field.
Once the date is correct, press the key to validate.
Setting the time: Same procedure as for setting the time.
If necessary, you can choose the Time zone and eventually the season.
From now on the phone hunts for a network on which it can make calls.
If it finds one, it displays the name of the network on the screen. You are
then ready to send or receive a call.
Setting time and date When you use your phone for the first time, you need to set the date and time.
Network
If the network icon appears, calls are possible on your operator's network.
If the letter R and a network name are displayed, calls are possible on the network of a different operator.
If the letter R is displayed without any network name, only the emergency services are accessible
(ambulance, police, fire brigade).
If the network icon flashes, the phone is in permanent search mode. There is no network available. The
signal strength indicator received allows you to display the quality of reception. If it indicates less than
three bars, search for better reception in order to call in good conditions.
Date and time
Cancel
Valid date?
OK
thursday
15 JAN 2004
251433924_myC-3b_lu_en.book Page 16 Jeudi, 22. janvier 2004 4:32 16