SMC Networks Console - Manual (Page 6)

Console Specifications
CS – 0206VLII
4/4/2006
Page 6 of 7
7) Finish and Color
7.1 All exterior and frame steel components including drawers, blank
panels, and shelving shall be zinc oxide wash primer with an enamel paint
finish. Manufacturer offers a variety of 7 different baked, enamel finishes
and 14 laminate colors.
7.2 All wooden components are to be supplied with a high-pressure
laminate covering the .45 lb. industrial grade board core.
8) Optional Accessories
All accessory storage cabinets, mobile drawer pedestals, printer stands,
binder storage, etc. shall be constructed of materials and finishes to match
the console exterior. They are to meet or exceed the quality levels
established by industry standards, to the configuration and dimensions
identified in the contract drawings.
8.1 Other options consist of:
a. Power Strips and Electrical Distribution Wiring
b. Accessories for the paneled slat wall (Pen holders, accessory
trays, paper trays, white boards, Tracked monitor mounts, etc.)
c. Storage pedestals
d. Task Lighting
e. Telephone mounts
f. Rack Mounting Cabinets (above or below the work surface)
g. CPU Storage Pedestals
h. CPU Storage on Swing Out Doors
i. Credenzas
j. Printer and Fax Cabinets
k. File Cabinets
l. Rotating Binder Storage Cabinets
m. Desks and auxiliary work stations
All custom woodwork options (file cabinets, binder storage, and
credenzas) are made to match console laminates and paint.
9) Mounting Hardware
9.1 Mounting hardware for the specified electronics shall be available
upon request. Any hardware needed for assembly will be provided.
10) Instructions/ Installation