Sanyo MEGAPIXEL VCC-HD5400 - Manual (Page 4)

3
Name and Function of Each Component
- -
Control cable
By connecting a system controller (sold separately), the camera can be controlled remotely.
Wire gutter cover
If you wire on the ceiling surface, remove the wiring gutter cover.
Audio jacks
Audio output terminal (black: 3.5-mm mini jack)
Use this jack to connect to the audio input jacks of a powered speaker system or a monitor.
Audio input terminal (white: 3.5-mm mini jack)
Use this jack to connect an external microphone to listen to the sound while monitoring the live
video, or simultaneously record the video and sound.
This jack supports 3.5-mm monaural microphone plugs, or monaural line-level input plugs (the left
channel only for stereo plugs).
Monitor output terminal (BNC type)
Connect this terminal to a monitor, etc. A live video will be displayed on the monitor once the
camera is turned on.
Cable holder
Safety cable
Use this cable to hook the camera on the supplied mounting plate when installing the camera.