Sanyo MEGAPIXEL VCC-HD5400 - Manual (Page 11)

10
Installation
Pattern sheet (supplied)
Ceiling
Mount the camera by aligning the triangular marks ( ), then rotate the camera in the arrow
(D) direction.
Make sure the camera is securely mounted. •
Open the side cover and tighten the fall-prevention screw (E) using the supplied hexagonal
wrench (F).
When fi nished, make sure to put the cover back.
(E)
(F)
•
The surface of the camera can be hot during operation, but it is not a malfunction.
When you touch the heated portion of the camera for a long time during installation, adjustment or
dismounting, you may get a low-temperature burn.
SD card may be hot immediately after use. When you remove a SD card from the camera, be
absolutely sure to turn it off and wait until it is completely cooled down.
•
•
(D) (D)