31 specifications, Specifications – Sony KL-X9200U User Manual
Page 31
Additional Information
GB
31
-GB
Specifications
Acceptable signal
(Appendix)
NTSC
3.58
/NTSC
4.43
/PAL/PAL M
/SECAM video signal, switched
automatically
RGB signal
(For details, see page 9.)
Projection system
3 LCD panels, 1 lens projection
system
LCD panel
1.3-inch TFT LCD panel
Approx. 2.36 million dots
(786,432 pixels)
1,024
×
768 dots
×
3 panels
Lamp
XL-100M: HID lamp, 100 W
Lens
Large diameter hybrid lens F2.4
Screen size (measured diagonally)
50 inches
Viewable image size
Approx. 50 inches (diagonally)
Approx. 1,016
×
762 mm (w/h)
Frequency range
Horizontal: 24.8 to 85 kHz
Vertical: 50 to 85 Hz
Inputs/outputs
VIDEO 1, 2 and 3 IN S VIDEO (4-pin mini-DIN):
Y: 1 Vp-p, 75 ohms
unbalanced, sync negative
C: 0.286 Vp-p (NTSC burst
signal), 75 ohms
0.3 Vp-p (PAL burst signal), 75
ohms
VIDEO (phono jacks):
1 Vp-p, 75 ohms unbalanced,
sync negative
AUDIO (phono jacks):
2 channels, 500 mVrms
Impedance: more than 47
kohms
COMPONENT IN
VIDEO (phono jacks):
Y: 1 Vp-p, 75 ohms, sync
negative
P
B
/C
B
/B-Y: 0.7 Vp-p, 75 ohms
P
R
/C
R
/R-Y: 0.7 Vp-p, 75 ohms
AUDIO (phono jacks): 500
mVrms (100% modulation)
Impedance: 47 kilohms
VIDEO OUT
S VIDEO (4-pin mini-DIN):
Y: 1 Vp-p, 75 ohms
unbalanced, sync negative
C: 0.286 Vp-p (NTSC burst
signal), 75 ohms
0.3 Vp-p (PAL burst signal), 75
ohms
VIDEO (phono jack):
1 Vp-p, 75 ohms unbalanced,
sync negative
AUDIO (phono jacks):
2 channels, 500 mVrms
Impedance: less than 1 kohms
RGB 1, 2 IN
D-sub 15-pin, female
VIDEO: R, G, B: 0.7 Vp-p,
positive, 75 ohms
SYNC: Sync on Green: 0.3 Vp-p
HD: Composite sync:
TTL, high impedance,
sync positive/negative
Horizontal sync: TTL, high
impedance, sync positive/
negative
VD: Vertical sync: TTL, high
impedance, sync positive/
negative
AUDIO (RGB 1 IN) (phono
jacks)
2 channels, 500 mVrms
Impedance: more than 47 kohms
AUDIO (RGB 2 IN) (stereo
minijack)
500 mVrms
Impedance: more than 47 kohms
RGB OUT
D-sub 15-pin, female
VIDEO:
R, G, B: 0.7 Vp-p,
positive, 75 ohms
SYNC: Sync on Green: 0.3 Vp-p
HD: Composite sync:
TTL, high impedance,
sync positive/negative
Horizontal sync: TTL, high
impedance, sync positive/
negative
VD: Vertical sync: TTL, high
impedance, sync positive/
negative
AUDIO (phono jacks)
2 channels, 500 mVrms
Impedance: less than 1 kohm
Speaker output
Front: 5 W
×
2 (L/R)
Woofer: 15 W
Power requirement
100 to 240 V AC, 50/60 Hz
Power consumption
220 W (MAX)
Standby mode: 4 W
Dimensions
1,125
Ч
1,087
Ч
610 mm (44
3
/
8
Ч
42
7
/
8
Ч
24
1
/
8
inches) (w/h/d)
Mass
Approx. 43 kg (106 lbs 8 oz)
Supplied accessories
Remote control RM-902 (1)
Size AA (R6) batteries (2)
AC power cord (1)
RGB signal cable (D-sub 15-pin
˜ D-sub 15-pin) (1)
HD15-HD15 (male, without the
No. 9 pin) adaptor (1)
Macintosh adaptor (1)
Windows Monitor Information
Disk/Utility Disk (1)
Macintosh Utility Disk (1)
Brackets (2)
Screws for brackets (2)
Hexagon head wrench (1)
Optional accessories
Lamp unit: XL-100 (for Japan)
XL-100U (for the U.S.)
XL-100E (for Europe)
XL-100M (for all other areas)
Monitor stand: SU-90T (only for
Japan), SU-90U (only for the
U.S.)
Design and specifications are subject to change without
notice.