Sanyo PLC-XF20 - Manual (Page 35)

35
VIDEO MODE
Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT buttons to select VIDEO
SOURCE and press the SELECT button. Another dialog box
VIDEO SOURCE Menu will appear.
Press the POINT DOWN button and a red-arrow icon will
appear. Move the arrow to the source that you want to select,
and then press the SELECT button.
1
2
This box indicates the
Video source being
selected.
SELECTING VIDEO SOURCE
When connecting to those equipment, select the type of Video
source in VIDEO SOURCE Menu.
Video
Y/C When connect the separate Y/C video output from the
video equipment to the VIDEO/Y and C jacks, select
"Y/C" in VIDEO SOURCE Menu.
When connect the composite video output from the video
equipment to the VIDEO/Y jack, select "Video" in VIDEO
SOURCE Menu.
S-Video When connect the S-Video output from the video
equipment to the S-Video jack, select "S-Video" in
VIDEO SOURCE Menu.
WHEN SELECT THE INPUT 3 (AV TERMINAL )
3
Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT buttons to select INPUT
SOURCE and press the SELECT button. Another dialog box
INPUT SOURCE Menu will appear.
Press the POINT DOWN button and a red-arrow icon will
appear. Move the arrow to "Y, Pb/Cb, Pr/Cr" and then press the
SELECT button.
1
2
Y, Pb/Cb, Pr/Cr
When connect the component video output (Cr, Y, Cb or Pr, Y,
Pb) from the video equipment to the R/Pr, G/Y and B/Pb jacks.
When connecting to those equipment, select the type of Input
source in INPUT SOURCE Menu.
WHEN SELECT THE INPUT 2 (5 BNC TERMINAL )