Sanyo PLC-XF20 - Manual (Page 17)

READY
LAMP
LAMP
REPLACE
WARNING
TEMP.
17
READY INDICATOR LAMP INDICATOR LAMP REPLACE INDICATOR
This indicator lights green
when the projector is ready
to be turned on. And it
flashes green in Power
Management mode. (P39) This indicator is dim when
the projector is turned on.
And bright when the
projector is in stand-by
mode.
INDICATORS
BEFORE OPERATION
WARNING TEMP. INDICATOR
This indicator flashes red
when internal projector
temperature is too high.
(P43)
WARNING
TEMP.
READ
Y
LAMP
REPLA
CE
LAMP
FRONT INDICATORS
REAR INDICATORS
This LAMP REPLACE
indicator lights yellow when
any of Projection Lamps is
nearing its end, and flashes
when any of them becomes
out. Check which lamp
needs to be replaced on
Lamp Status Display. (P44)