Sharp IM-DR420H - Manual (Page 26)

03/7/21 IM-DR420H_UK_4.fm
26
IM-DR420H
IM-DR420H(E) TINSE0554AWZZ
Us
ef
ul Fea
tur
es
-A
d
v
a
n
c
e
d Re
c
o
rd
ing-
Advanced Recording (continued)
! Playback sound-actuated recording
Recording automatically starts or pauses by detecting
sound from the stereo system (synchronised recording).
To interrupt recording
" When the stereo system is stopped, the unit will enter
the synchro recording pause mode. When playback is
resumed, recording will also resume.
" If a silence lasts for 3 seconds or more, recording will
be paused (pause function does not work for approxi-
mately 10 seconds after recording starts). When the
unit receives sound again, recording automatically
starts.
" A new track number is created when recording
resumes.
1
Press the REC button.
2
Begin playback on the stereo system con-
nected to this portable MD.
3
Press the or button to adjust the re-
cording level (see page 18).
4
Press the PAUSE button on the stereo sys-
tem to enter the playback pause mode.
Select the starting point for your recording and press
the PAUSE button.
5
Press the MENU/ENTER button.
6
Press the or button repeatedly to se-
lect "REC MODE".
7
Press the MENU/ENTER button.
8
Select the recording mode (step 4, page 24)
and press the MENU/ENTER button.
The mode will be set automatically after 7 seconds
even if the MENU/ENTER button is not pressed.
9
Press the MENU/ENTER button.
10
Press the or button repeatedly to se-
lect "SYNC ON".
11
Press the MENU/ENTER button.
" The BASS/SYNC button can be used instead of
steps 9 - 11.
" "SYNC" will flash.
" To cancel the operation, press the :OFF/HOLD
button.
12
Begin playback on the stereo system.
Recording will begin automatically.