Recording – Sharp IM-DR420H User Manual
Page 18
03/7/21 IM-DR420H_UK_3.fm
18
IM-DR420H
IM-DR420H(E) TINSE0554AWZZ
Ba
si
c O
p
er
ati
o
n
-Re
c
or
ding-
Recording
Before recording
Cancel the hold mode.
The portable MD does not work whilst in the hold mode.
As for the details, see page 16.
1
Press the REC button.
2
Begin playback on the stereo system con-
nected to this portable MD.
3
Press the REC LEVEL
or
button to
adjust the recording level.
Analogue recording (connecting with analogue
cable)
Adjust the recording level so
that the maximum sound vol-
ume from the source makes the
reading swing somewhere be-
tween -4 dB and 0 dB.
Digital recording (connecting with digital cable)
You can adjust the level in 1 dB
increments between + 10 dB
and - 10 dB.
Once you adjust the recording level, the setting is re-
tained even after the recording stops. (For cancella-
tion instructions for the digital recording level, see
page 33.)
The sound from the earphones does not change
even if the digital recording level is adjusted.
4
Press the PAUSE button on the stereo sys-
tem to enter the playback pause mode.
Here, you can search for the track to be recorded.
0 - 30
+ 10 dB to - 10 dB