Sony KP 48V85 - Manual (Page 23)

19
S VIDEO
S-LINK
CONTROL S
OUT
40W(NOM)
80W(MAX)16
CENTER SPEAKER
IN
S-LINK
VIDEO
AUDIO
L
R R
VIDEO
L
AUDIO
(MONO)
IN
IN
VIDEO 1 VIDEO 3 VIDEO 4
OUT
MONITOR AUDIO
(VAR/FIX)
TV
VIDEO 5
VIDEO 1 VIDEO 3 VIDEO 4 VIDEO 5
Y
P B
P R
R
L
(MONO)
AUDIO
OUT
MONITOR
AUDIO
(VAR/FIX) TV
Disconnect all power sources before making any connections.
(Rear of projection TV)
RK-74A
(not supplied)
Rear
speaker (L)
CENTER
SPEAKER
IN ‘, ’
Line inputs
Amplifier with
Dolby Pro Logic
decoder
Woofer
3
Rear
speaker (R)
Front
speaker (R)
Front
speaker (L)
1
2
AUDIO-L
(white)
AUDIO-R
(red)
1 Using the AUDIO cable supplied with the
speaker to AUDIO (VAR/FIX) OUT on
the projection TV.
2 Using the CONTROL S cable, connect
CONTROL S IN on the speaker to
CONTROL S OUT on the projection TV.
Connecting an amplifier that
supports Dolby Pro Logic decoder
If you use an amplifier with a Dolby Pro
Logic decoder instead of the projection TV’s
audio system, you can still use the projection
TV’s speaker as center speaker.
1 Using the speaker cords (supplied with
the amplifier), connect the speaker
terminals on the amplifier to CENTER
SPEAKER IN +/– on the projection TV.
2 Using an AUDIO cable, connect AUDIO
(VAR/FIX) OUT on the projection TV to
one of the unused Line inputs (e.g. Tape-
2, AUX1, etc.) on the amplifier (White-
AUDIO Left, red-AUDIO Right).
3 Set the amplifier to the chosen Line input
and use the Audio menu to set “Speaker”
to “Center” on the projection TV. (see
“Speaker” on page 36)