Sony XDCAM PDW-1500 User Manual
Page 107
Ch
apt
er 8
Men
u
s
107
8-3 Extended Menu
710
INTERNAL VIDEO SIGNAL
GENERATOR
Select the test signal to be output from the internal test signal generator.
When “SG” is selected using the VIDEO INPUT SEL button, the internal
test signal generator operates to output the selected test signal. This
signal can also be recorded.
BB (Black Burst): Black burst signal
CB75 (75% Color Bars): 75% color bar signal
CB100 (100% Color Bars): 100% color bar signal
The factory default settings for each line mode are as follows:
In 525(U)/525(J) line modes: CB75 (75% Color Bars)
In 625 line mode: CB100 (100% Color Bars)
713
VIDEO SETUP REFERENCE
Select whether to remove the setup (7.5%) from the input analog video
signals and whether to add the setup (7.5%) to the output analog video
signals (when 525(U) or 525(J) line mode is selected).
Sub-item
1
INPUT LEVEL
Whether to remove the setup (7.5%) from the input analog video signals.
0.0%: Do not remove.
7.5%: Remove.
The factory default settings for each line mode are as follows:
525(U) line mode: 7.5%
525(J) line mode: 0.0%
2
OUTPUT LEVEL
Whether to add the setup (7.5%) to the output analog video signals.
0.0%: Do not add.
7.5%: Add.
The factory default settings for each line mode are as follows:
525(U) line mode: 7.5%
525(J) line mode: 0.0%
715
VIDEO GAIN CONTROL
Adjust the video output level.
–512 to 0 to 511
716
CHROMA GAIN CONTROL
Adjust the chroma output level.
–512 to 0 to 511
717
CHROMA PHASE CONTROL
Adjust the chroma phase.
–128 to 0 to 127
718
SETUP LEVEL (525(U)/525(J) line
modes)/BLACK LEVEL (625 line
mode)
Adjust the setup level (black level).
–512 to 0 to 511
719
SYSTEM PHASE SYNC
Adjust the output signal sync phase.
–128 to 0 to 127
720
SYSTEM PHASE SC
Adjust the output signal subcarrier phase.
0 to 511
723
INPUT VIDEO BLANK
Switch blanking on or off for individual lines in the vertical blanking
interval of an input video signal. The Y/C signal and odd/even fields are
blanked simultaneously.
A signal with blanking carried out according to this setting is recorded.
Sub-item
1
ALL LINE
- - -: Specify the blanking for each line separately.
blnk (blank): Regardless of the setting of other sub-items, blank all lines
which can be specified in this menu item.
thru (throu): Regardless of the setting of other sub-items, switch off
blanking for all lines which can be specified in this menu item.
2 ... 10
LINE 12 ...
LINE 20
In 525(U)/
525(J)
line
modes
Specify blanking for lines 12 to 20.
blnk (blank): Carry out blanking.
thru (throu): Switch off blanking.
2 ... 15
LINE 9, 322 ...
LINE 22, 335
In 625 line
mode
Specify blanking for lines 9, 322 to 22, 335.
blnk (blank): Carry out blanking.
thru (throu): Switch off blanking.
Menu items in the 700s, relating to video control
Item number
Item name
Settings