beautypg.com

Bravia sync (“control for hdmi”) others – Sony SMP-N100 User Manual

Page 26

background image

26

The desired wireless router is not
detected even if “Scan” is performed.

, Press RETURN to return to the previous

screen, and try “Scan” again. If the desired
wireless router is still not detected, press
RETURN to select “Manual registration.”

The message “A new software version has
been found on the network. Perform
update under "Network Update."” appears
on the screen when turning the player on.

, See “Network Update” (page 19) to update

the player to a newer software version.

The “Control for HDMI” function does not
work (BRAVIA Sync).

, Check that “Control for HDMI” is set to

“On” (page 22).

, If you change the HDMI connection, turn

the player off and on again.

, If power failure occurs, set “Control for

HDMI” to “Off,” then set “Control for
HDMI” to “On” (page 22).

, Check the following and refer to the

instruction manual supplied with the
component.
– the connected component is compatible

with the “Control for HDMI” function.

– the connected component’s setting for

the “Control for HDMI” function is
correct.

, When you connect the player to a TV

through an AV amplifier (receiver),
– if the AV amplifier (receiver) is not

compatible with the “Control for HDMI”
function, you may be unable to control
the TV from the player.

– if you change the HDMI connection,

disconnect and reconnect the mains lead,
or a power failure occurs, try the
following:

1

Switch the input selector of

the AV amplifier (receiver) so that the
picture from the player appears on the
TV screen.

2

Set “Control for HDMI” to

“Off,” then set “Control for HDMI” to
“On” (page 22). Refer to the instruction
manual supplied with the AV amplifier
(receiver).

Playback does not start from the
beginning of content.

, Press OPTIONS, and select “Play from

start.”

Playback does not start from the resume
point where you last stopped playing.

, The resume point may be cleared from

memory when
– you disconnect the USB device.
– you play other content.
– you turn off the player.

The player does not respond to any button.

, Hold down [/1 on the player for more than

10 seconds until the indicators on the front
panel turn off.
If the player still does not respond to any
button, disconnect then reconnect the mains
lead.

BRAVIA Sync (“Control for
HDMI”)

Others